Energy meter

MEM INDUSTRY

ELECTRICITY CONSUMPTION MONITOR
WITH TWO INPUTS

Double optical sensor for the measurement of consumption directly from the meter's led
Connected via GSM platform Acotel Net with sending data programmed every 3-6-12-24 hours
Powered by LiPo batteries + toroid to ensure continuous power supply
You can access the consumption data collected from MEM Industry throught Energy Management service in the Acotel Net platform.

Configure device inputs according to your needs.
Energy meter
SPECIFICATIONS

TECHNICAL DETAIL

DESCRIPTION

Custody Plastic container in ANSABLEND PC/ABSVO
Degree of protection IP54
Dimensions 122X77X45 mm
Architectural Hardware CPU XLP, Main Clock 8.00Mhz, RTCC 32768Khz Power consumption when in Sleep mode: 20uA around with sensor
Supply Alkaline Batteries 6V nominal: $x AA LR6 Alkaline-Manganese-Dioxide
Power optional accessory
(available only throught Acotel)
Primary battery type LIPO 3,6V nominal 2000mAh : XK113450 + Toroid splitcore CT10/CT24
Primary battery type LIPO 3,6V nominal 2000mAh : XK113450 +
Power Plug Wall 2,5 Amp 5,5Vcd Coax Jack 3,5mm
External connections Jack 2,5mm (connecting sensors)
Coax Jack 3,5mm (optional power connection)
Variables acquired Digital input CH1: counter, max freq. 500Hz
Communication channels GSM/GPRS quad-band
Marking CE
Complies with regulations EN61326-1 e ETSI EN 301 489-7; SAR EN 50385

ACCESSORIES

Double optical sensor to be connected to the LED of the meter for the measurement of consumption

Adapter for the double optical sensor to be used in the case where the counter is Enel or similar

Pin for the use of the buttons

The device is powered by LiPo batteries + toroid to ensure continuous power supply

The device is designed to be powered with AC Adapter 5,5Vdc-9Vdc.
This accessory can be purchased
only through Acotel Net, please contact Customer Service

Optical sensor connected to the LED of the meter for the measurement of consumption